Top-11 Which Megger Should I Buy? {Expert Suggestions – 2024}

If you’re looking that which megger should i buy?

You’re in luck!

A megger is a device used to measure electrical currents. Megger instruments are used by electrical engineers and technicians to measure the amount of current that flows through a circuit.

This is important because the amount of current flowing through a circuit affects the performance of the circuit, and can cause a malfunction or even damage the circuit.

There are many models available to choose from, but which one is best? To help you decide, we’ve compared the features of each model, as well as the pros and cons of each, so you can make an informed decision

Below We Have Mentioned That Which Megger Should I Buy?

11. Overall Best, Our Top Pick and Amazon Choice – Fluke 117 Digital Multimeter

The Fluke 117 is a compact, easy to use, and accurate digital multimeter that can measure all types of electrical resistance, continuity, frequency, capacitance, and voltage.

This versatile instrument features an automatic AC/DC voltage selection, low impedance mode, and a built-in auto range function.

It is also equipped with a built-in oscillator and a built-in frequency counter. The instrument measures resistance from 1 kOhm up to 1 MOhm, continuity from 2.001 micro-ohms up to 100 meg-ohms, capacitance from 10 picofarads up to 1,000,000 picofarads, and frequency from 1 Hz to 100 MHz.

This best digital megger has a built-in low impedance mode for measuring small currents, and the instrument has an automatic range function that allows you to measure voltages from 2 V to 40 VDC.

The Fluke 117 Digital Multimeter includes an adjustable test probe that can measure continuity from 3.01 micro-ohms up to 1,000,000 micro-ohms. The test probe has a built-in high-voltage switch that allows you to measure voltages from 2 V to 40 VDC.

The instrument also has a built-in oscillator that can be used to measure frequency from 1 Hz to 100 MHz. This best megger to buy also includes a built-in frequency counter that can measure frequency from 1 Hz to 100 MHz.

Key Features

• Digital Multimeter
• Non-Contact AC-Voltage Detection
• Auto DC/AC Voltage Selection
• Low Impedance Mode
• Battery Powered
• 550 Grams Weight
• Size: 6.57″ x 3.31″ x 1.81″

10. Best Seller on Amazon – Supco M500 Insulation Tester/Electronic Megohmmeter

The Supco M500 is a handy, easy-to-use, compact, and accurate electronic megohmmeter. It’s designed to quickly, accurately, and easily test insulation resistance.

This handy device measures a wide range of insulation resistance values from 0 to 1000 megohms. It includes an LED light for viewing the results.

The best megger for electrician can be used to check electrical wiring, conduit, and cable, as well as air conditioning and heating ducts.

It also works for testing the insulation of circuit breakers, switches, fuses, and receptacles.

This best value megger has a carrying case with a soft pouch for protection and easy storage. The M500 comes with a soft carrying case that protects the unit from damage. This insulation resistance tester is powered by 3 x AAA batteries (included).

Key Features

• Brand: Supco
• Power Source is battery powered
• Hand held
• Zone scale for indicating insulation condition
• Weight is 12 Ounces
• Size: 9.3″ x 6″ 1.8″ (LxWxH)\

09. Best Budgeted – Klein Tools ET600 Multimeter

A multimeter is a handy tool that can be used to measure and test electrical components. A multimeter consists of a dial and a probe that can be used to measure voltage, resistance, capacitance, and continuity.

Multimeters are useful for measuring the amount of resistance and the amount of current flowing through a circuit. For example, you can use a multimeter to determine the resistance of a wire by connecting the multimeter to the wire.

This best cheap megger has two probes and a digital display. It is used to test the performance of various electronic devices. It has an LED display with a high-resolution LCD screen.

The best low cost megger is used to test insulation. It is used to test the continuity of wires and cables. It can be used to test the insulation of wire, cable, and tubing.

A capacitor tester is used to test the performance of capacitors. A inductance tester is used to measure the amount of inductance.

Key Features

Battery Powered

Style is Tester

Warning alarm & high-voltage incon

6 AA batteries

Material is Polycarbonate, ABS and Electrical components

1-Year Warranty

Weight is 1.4 Pounds

Size: 1″x1″x1″ (LxWxH)

08. Best Rated Ohm Meters & The Best for Features – AEMC 2126.53 Digital Megohmmeter

The digital megohmmeter is an instrument that measures the resistance of a material. The resistance is measured by the voltage needed to pass a current through a material.

The higher the resistance, the more voltage needed to pass the current. The digital megohmmeter is a very useful tool for testing the resistance of materials.

The best megger multifunction tester can be used to test the resistance of metals, plastics, and ceramics. The megohmmeter uses a constant current source and a digital readout to measure the resistance of the material.

The resistance of a material is measured in ohms. The megohmmeter has a built-in reference resistor, which provides a reference value. This reference value is 2.0 ohm.

The insulation resistance tester measures the resistance of a material from 3.001 to 10,000 ohms. The resistance of a material is measured in ohms.

The megohmmeter is calibrated in ohms. The megohmmeter can be set to measure between 4.001 and 10,000 ohms.

Key Features 

• Style is Digital
• Material is plastic
• Battery Powered 
• 6 AA batteries
• Weight is 0.01 ounces
• Size is 14.92″ x 10.94″ x 3.78″

07. Very Popular & Compacy Size – Extech 380260 Autoranging Digital Insulation Tester

Extech has released the 380260, a digital insulation tester designed to test for the presence of R-Value. The device is capable of testing for the presence of R-Values.

The Autoranging Digital Insulation Tester has a range of 50 ohms to 600 ohms. It has a maximum current of 25 mA. It’s an easy to use tool that measures resistance in the attic.

This megger insulation tester is very simple to use. Just place the probe into the insulation, push the button and you’ll get your reading on the display. 

If the insulation is not damaged, you should get a reading around. The red LED will light up and you can read the reading on the LCD display.

This best brand for megger is indicate the resistance of the insulation. You should see a reading between 2.0 and This insulation tester has a 2 year warranty.

Key Features

• Style is digital
• Material is plasic
• Color is orange and grean
• Double backlit LCD-display
• 6 AA batteries
• Weight is 1 Kilogram
• Size is 7.8″ x 1.9″ x 3.6″

 

6. Quite Compact & Built-in Safety Features – Fluke 1507 Digital Megohmmeter Insulation Resistance Tester

The Fluke 1507 is a digital megohmmeter that allows you to test the resistance of insulation. This insulation tester is compact and easy to use. It has an LCD display, and it provides a measurement in ohms.

The meter has a standard set of probes that are perfect for testing the resistance of insulation. You can also use it to test cables and wires.

The meter comes with two probes, one for testing the resistance of insulation and one for testing cables and wires.

The probes have an alligator clip that makes it easy to attach the probe to any surface. It’s also easy to change the probes since they’re detachable.

The 1507 also has a handy LED light to help you see where the insulation is located. The meter has a built-in flashlight.

The light is bright enough to illuminate the insulation. The meter has a small battery compartment that stores the batteries when they’re not in use.

The megger insulation tester is easy to use, and you don’t need any special skills or tools to operate it. It’s great for anyone who wants to test insulation resistance.

Key Features

• Battery Powered
• Style is Standard
• Material is plastic
• Save both money & time automatically
• Read measurements with ease
• Weight is 1-kg.
• Size is 13″ x 6″ x 3″ (LxWxH)
• Warranty is 1-Year

05. High-end Premium Choice – Fluke-1587 FC Fluke 1587 FC 2-In-1 Insulation Multimeter

Fluke is a brand name for a product line of test equipment produced by Fluke Corporation. The company was founded in 1884 by Charles F. Fluke and is headquartered in Everett, Washington.

The Fluke brand name is often used to refer to the Fluke 1587 FC 2-In-1 Insulation Multimeter.

The Fluke 1587 FC 2-In-1 Insulation Multimeter is a digital multimeter that measures electrical conductivity, insulation resistance, and capacitance. It also has an RMS input voltage tester and a continuity tester.

The 1587 FC 2-In-1 Insulation Multimeter can measure AC and DC voltages. It features a 3.5-inch LCD display, dual-channel A/D converter, and a single-channel D/A converter.

The Fluke 1587 FC 2-In-1 Insulation Multimeter is compatible with PC, Macintosh, and Windows operating systems. It requires a computer with a serial port and a USB port.

The Fluke 1587 FC 2-In-1 Insulation Multimeter is available in a variety of colors.

We are proud to be the first company to introduce the Fluke 1587 FC 2-In-1 Insulation Multimeter.

This is a high performance, high accuracy, and high reliability instrument that provides you with the most accurate results.

This versatile meter can measure both conductivity and dielectric loss. It has the ability to measure insulation thicknesses from 1/8″ to 4″ and is suitable for residential and commercial applications.

Key Features

• Corded Electric
• Measurement Type is multimeter
• VFD low-pass filter
• Weight is 300 Grams
• Size is 14″ x 10.5″ x 4″ (LxWxH)

04. Best for AC-Voltage Insulation Resistance Meter – BTMETER BT-6688B Megohmmeter 

The BT-6688B is a high quality, precision, digital, insulation resistance tester. It provides a wide range of voltage, current, and resistance testing capabilities.

It has a large, easy to read display and backlight. The device is compact and portable. It measures the resistance between a pair of test points and displays the results. It features auto ranging, so you don’t have to manually set the range.

The BT-6688B has an auto ranging feature, which allows the device to automatically set the range for you. The unit measures up to 500 volts and up to 1,000,000 ohms. It can handle currents up to 200 mA.

The BT-6688B can measure the resistance between two points. The unit has a backlight that makes it easier to read the display.

It measures up to 500 volts. The BT-6688B has a large, easy to read display and backlight.

Key Features

• Corded Electric
• Weight is 1.28 kg.
• Size is 10.4″ x 9.2″ x 3.4″
• Large backlight display
• High-Insulation Resistance Tester
• Wider Testing Voltage
• Material is ABS
• Reliable and Safe Mega Ohmmeter

03. Best Backlight-Insulation Resistance Meter – REED Instruments R5600 Insulation Tester and Multimeter

R5600 is a compact, handheld insulation tester that has a built-in multimeter. The R5600 can be used to test the insulation of electrical wires, cables, or other conductors.

The R5600 measures the resistance of the conductor being tested, displays the results on the built-in LED display, and stores the data in memory for later review.

The R5600 features a push button switch with a 10-second hold time. The switch is easy to operate with one hand.

The R5600 has a 3-position selector switch with a 30-second hold time. The switch can be set to three different ranges of test resistance:

• 0 to 2000 Ohms (lowest resistance)

• 2000 to 10000 Ohms (normal resistance)

• 10000 to 25000 Ohms (highest resistance)

The R5600 has a built-in light-emitting diode (LED) display that indicates the test resistance range selected. A red LED indicates a low resistance; a green LED indicates a normal resistance; and a yellow LED indicates a high resistance.

The R5600 has a built-in memory function that stores the results of multiple tests. The memory is accessible by pressing the menu key. The memory can store up to 100 tests.

The R5600 has a built-in voltage meter that displays the measured voltage. The meter is accurate to 1% of the reading. The R5600 has a battery compartment that holds two AA batteries.

The R5600 has a built-in memory function that stores the results of multiple tests. The memory is accessible by pressing the menu key. The memory can store up to 100 tests.

Key Features

• Style: Standard
• Certified Frustration-Free
• Material is Reed
• 6 x 1.5v Aa Battery
• Easy to read, Large Double display with backlight
• Weight is 1 Pounds
• Size is 3.5″ x 8″ x 2″ (LxWxH)

02. Built-in Quality Material – Color LCD Display AmazonCommercial Heavy Duty 50000 Count Digital Multimeter

The Amazon Commercial Heavy Duty 50000 Count Digital Multimeter, Color TFT LCD Display, True RMS, CATIV 600V is a high quality multimeter with a rugged design that’s ideal for measuring voltage, current, resistance, continuity, and power.

This multimeter includes a large, easy-to-read, color TFT LCD display, making it simple to view the values you’re measuring.

It also has a built-in True RMS function, which provides accurate readings of AC and DC voltages. It offers an overload protection feature to protect the meter from excessive current loads.

The Amazon Commercial Heavy Duty 50000 Count Digital Multimeter, Color TFT LCD Display, True RMS, CATIV 600V is designed to be used in commercial environments and is made of durable materials for long-lasting performance. It’s backed by a limited lifetime warranty.

Key Features

• Multimeter
• Style is Digital
• Battery Powered
• Handheld Digital Multumeter
• Color LCD Display
• Weight is 0.79 Pounds
• Size: 6.69″ x 1.97″ x 3.11″ (LxWxH)

01. Best Compact, Lightweight & Easy to Use – Megger MIT310-EN Insulation Tester

The MIT310-EN is a simple, affordable, and easy-to-use test meter that is used to measure the resistance of electrical insulation materials. The MIT310-EN features a 1000 ohm, 500 VDC test voltage, a 250 VDC test voltage, and a 0-1000 VDC range.

The MIT310-EN is an ideal tool for testing electrical insulation materials. It is especially useful for testing the insulation on wires, cables, transformers, motors, switches, fuses, circuit breakers, and other electrical components.

The MIT310-EN is compact and lightweight, making it easy to carry around. It is a great tool for testing insulation in the field or at a trade show.

This best price megger is perfect for anyone o needs to test the electrical insulation of wires, cables, transformers, motors, switches, fuses, circuit breakers, and other electrical components.

A Megger MIT310-EN Insulation Tester is a high-quality, easy-to-use, and reliable electrical test meter that can be used to test the resistance of insulation on electrical wires and cables.

Key Features

• Corded Electric
• Style is 1000 Megaohms Resistance
• Double digital display 
• Average-Sensing Meter
• Size: 12.4″ x 11.1″ x 4.3″
• Weight is 2.16 pounds

Buying Guide for Which Megger Should I Buy?

One thing you have to know about a tester before buying one is that they are generally priced very high, but some offer better quality than others.

For example, some tester manufacturers don’t offer all the essential features, or they only give you a limited range of functions. So, you may have to spend a little more for a tester with the best

1. Insulation Resistance Tester Test Range

When you buy a resistor or inductor, there is one thing that you want to consider most – the resistance value.

This will depend on several factors such as the wire material, thickness of the wire, and the resistance of the resistor.

There are several ways to measure resistance. One of these ways is with an ohm meter. The ohm meter is very handy since.

it is easy to use. It can be used to check the resistance value of your inductor or resistor before you order them from the market.

This test range will help you determine if the resistor or inductor you are buying has the right resistance. If you want to know more about this resistor or inductor, then you can read our product information page here.

You may also want to check out our product comparison page here. Product Information The following is a list of products that we carry for our insulation resistance tester test range.

2. Voltage Rating

If you are planning to buy an insulation resistance tester, it is important that you know the specifications of the voltage range that the product supports. Knowing these specifications before buying helps in making a good decision.

You need to consider two things:

• What voltage level do you need to test?

• How many amps can the device withstand?

3. Type of Insulation Resistance Tester

For the insulation resistance tester, you have two different options available in the market: the micro ohmmeter and the megohmmeter.

While the micro ohmmeter is suitable for checking resistances from a few hundred milliohms to a few ohms, the megohmmeter can handle resistances ranging from a few hundred ohms to as high as a few megaohms.

The megohmmeter is generally used for testing the insulation resistance of the power cables, which can range between 1M and 100M.

A normal micro ohmmeter will not be able to check the insulation resistance of the power cables because it will fail to detect the very low currents that are present in the cables.

So when it comes to choosing a proper insulation resistance tester for the insulation resistance test of the power cables, you need to choose the megohmmeter over the micro ohmmeter.

4. Portability

Portable devices have a certain characteristic of being light weight and compact in size.

To make sure that they can do their job well and provide accurate readings, they need to be equipped with an adequate set of sensors. In this case, insulation resistance testers are very much needed.

FAQs About Which Megger Should I Buy?

Q.1, Is it possible to check the accuracy of an insulation resistance tester?

Ans: Yes, of course. You can get an idea about the accuracy of an insulation resistance tester by referring to the accuracy range offered by the manufacturer.

Most manufacturers offer the accuracy levels in both positive as well as a negative range which is basically a possibility of a minor tolerance between actual resistance and displayed result.

You can also check the accuracy manually by setting up the switch to the 20-V range and checking whether the device displays the value as X.

Q.2, Can I use a multimeter instead of an insulation resistance tester?

Ans: Multimeters are basically all-inclusive electronic measurement devices that are designed to offer a specific test range for all types of electrical measurements.

On the other hand, an insulation resistance tester, which is a type of ohm meter, is only designed for checking the resistance level of the insulation material.

A standard multimeter can be used for testing voltage, current, and even resistance levels. Therefore, you can use a multimeter instead of an insulation resistance tester if it offers the same test range which is needed for your application.

Q.3, Which insulation resistance tester is the right choice for a beginner?

Ans: An insulation resistance tester is a tool used to check the insulation resistance of an electrical wire, wire cable or wire harness.

The purpose of an insulation resistance tester is to measure the electrical resistance between two points on the wire or cable.

An insulation resistance tester is used to check the integrity of the insulation on wires and cables.

The insulation resistance of a wire or cable is a measure of its ability to insulate, or isolate, from another wire or cable. Insulation resistance is often measured in ohms (Ω).

Resistance is inversely proportional to the current flow through a wire or cable. A higher resistance means a lower current flow, which means that the wire or cable has a higher resistance.

Insulation resistance is measured by applying a small electric current to a wire or cable, and measuring the voltage across the wire or cable. If the insulation resistance is too low, the wire or cable will be damaged and have reduced service life.